Boost Gauge Vent Pod Kit XR5 / MK2 RS

We are excited to introduce an Australian first complete boost gauge kit. That's right - a kit that includes absolutely everything you need to easily fit a boost gauge to your XR5 Turbo!

This kit allows you to run an aftermarket boost gauge while keeping it tucked away and subtle. Check your boost pressure at any time.

Step by step install video:

 Included in the kit:

• Turbosmart 30psi 52mm Boost Gauge (dimming)
  • Gauge
  • Gauge sun visor
  • Gauge fixing bracket
  • Raceworks silicone vacuum line
  • Vacuum T piece
• XRV CP Vent Pod
• XRV CP Custom PNP (plug & play) Wiring Harness 
• Carbon fibre look vent surrounds (if optioned)
• 4 zip ties

 
Kit can be installed on either driver or passenger side of steering wheel - wiring and vac line is long enough for either fitment.

Installing the wiring can be done in as little as 2 minutes - plugs directly into factory wiring harness - while leaving factory gauges functioning as per usual. This all means that no modification needs to be made to the original body harness.

Carbon fibre look vent surrounds can be optioned. The original surrounds very often break when removing the vents - replace and upgrade the original surrounds with new carbon look units!

Two considerations were taken into mind while designing the vent pod:

1. Fit directly into the factory vent to retain a simple design
2. Allow air flow through the vent - absolutely required for AC in Aus..!

Key Features:

• Turbosmart gauge - black face with a silver bezel to match the original cluster
• Full installation kit - don't worry about sourcing parts yourself
• LED illumination + dimming when headlights are switched on
• XRV CP vent replacement is aesthetically pleasing and a functional design

The benefits of adding the XRV CP Vent Pod Kit Are:

• Upgrade the look of your interior 
• Diagnose boost issues easily
• Specific boost pressure analysis